General Description of Cable reel
Cable reels are designed for top performance, long service life and easy maintenance. Ideal for hoists, electric tools and moving equipment.
Guide for pattern selection
* Varieties of cable reels and hose reels (transferring gas or liquid) are available designed and manufactured by DLS.
* Cable reel driven by swirling spring is optional for the cables with less weight and short traveling distance. Cable reel driven by moment motor or three-phase asynchronous motor (hysteresis motor) is suitable for the cables with heavy weight and much longer traveling distance. According to the on-site conditions, the exogenetic force or weight-loaded driving can be used as driving power.
* The winding length of the cable comes standard upon 'L' in Installation Pattern Sketch. The available cable lengths are as follows:
1). L+3 loops in Pattern A;
2). L+h+3 loops in Pattern S;
3). L+H+h+3 loops in Pattern C & D;
4). The cable length in Pattern E and F can be determined upon the on-site conditions. Please note when ordering.
* In pattern C, it is mounted on the ground. There is relative friction between the cables and the ground when the reel is winding or unwinding the cables. Thus, a rollaway nest should be mounted within the cable motion area to minimize wear-and -tear of the cables.
* In pattern F, there generally comes standard of H=0.14L, h=0.5H. If H is less than 0.14L and h less than 0.5H, the values of H and h must be equipped with specified when ordering.
* It will be equipped with specially designed roller brackets for the convenience of installation if provide with electric block to run on the single bridge crane.
* It outlet directions are marked in the overall dimension drawing. Please note when ordering unless otherwise specified.
* The cable weight (transferring tube ) is excluded from the column of 'Mass' in overall dimension table.
* If there sis no special specification, the moment motor powered and hysteresis motor powered cable reels are generally of overhanging type in the structure patterns.
* The customer should provide the extra cables if the cable length exceeds 30 meters (including 30meters). |
|
Spring Cable Reel
It is used for automatic reeling of cables on various types of moving equipments. It is suitable for portal cranes, grabs, magnets, lift and working platforms, machinery, excavators, mobile cranes, transfer vehicles and transport systems.
motorized cable Reel
In ports, steel mills, water treatment plants and mines where low voltage and high voltage cables as well as hoses, Kemeida's motorized cable reel can cater for all kinds of applications.
About Inquiry
To help you get the best magnet for your application, we should have the following information:
1. What kind of working site does the it work?
2. Do you use crane? If yes, tell me hoist height of the crane.
3. What's the current, voltage?
|
|
|
